• 1977 Carver Mariner 3396 Restoration

    I figured I'd start a new thread in the projects area for the carver, I'll link the other one here too. I'll start this one with a really cool item I just received for the boat, an original factory ad for the Carver line featuring the 33' Mariner from a 1976 "Rudder" magazine:


    And a reminder pic of her in the water prior to our purchase:


    And a final pic of how she looks now:


    Small interior progress continues, but the big stuff starts after the new year.
    Richard F likes this.


    This article was originally published in forum thread: 1977 Carver Mariner 3396 started by Cap'n Ray,
    To Join The Discussion and View the Original post Click Here.


  • Recent Forum Posts


    It was 98F yesterday so it took me a while to try...

    It was 98F yesterday so it took me a while to try your suggestions. I put a jumper between the positive battery terminal and each of the three poles on the ignition switch. When I did so, the...

    eltonbutler Today, 12:23 Go to last post

    Hi and welcome. You have an intermittent bad...

    Hi and welcome.

    You have an intermittent bad connection "somewhere". The problem is that you can't really test those with a multi meter as you may test the circuit when the connection is good and...

    lotus Yesterday, 15:44 Go to last post

    New to forum, old boat and owner, new problem

    Hi, I'm new to the forum and need some wisdom. I have a 1988ish 19' Sunbird with a 2.3 OMC cobra motor. This boat has made multiple trips to B.C. and Alaska and has been great - but... I took it...

    eltonbutler Yesterday, 13:49 Go to last post
  • Twitter